Digital levels, Bend Aligners, and Smart tools at Van Sant Enterprises, Inc.

Smart Tool Digital Angle Level

No shop should be without this handy digital level. Accurate to 1/10 of a degree, the Digital Angle Level runs for about 400 hours on a single 9 volt battery, has an automatic shut off after 6 minutes and a low battery indicator. Displays degrees, slip % and pitch (in/ft) with arrows to show the direction to move towards level. Simple one minute recalibration and hold feature locks the reading on the display. Display rotates upside down with level and audible indicator beeps when you reach level.

Stock Items
Ship Weight: 4 lbs

Read Customer Reviews on this product

	Digital SmartTool (module only) 1/10 degree accuracy 1/2" High Display Simple 1 minute recalibration Battery-9volt (included) for about 400 hours of use	$109.00
	Deluxe Digital SmartTool Sturdy aluminum rail protects module Rubber magnet base for hands free use Length is 8", Height is 2.6", Thickness is 1.4", wt:15oz.	$149.00
	Magnetic bracket Fits Angle Level module Strong magnet allows use on vertical surfaces Great for setting up saws or machining angles Length is 7", Height is 2"	$19.00
	SmartTool Bend/Notch Aligner w/ Module A SmartTool module combined with the bend aligner bracket attaches to tubing and will track rotation to keep your bends and notches in the same plane. 3/4" - 2" OD	$175.00
	SmartTool Bend/Notch Aligner only Use your existing SmartTool module to track rotation and keep your bends and notches in the same plane. 3/4" - 2" OD	$75.00
	SmartTool Rail only Sturdy aluminum rail fits SmartTool module Rubber magnet base allows hands free use In various lengths
	8".......................................	$45.00
	24"....................................... includes bubble vials	$55.00
	48"....................................... includes bubble vials	$65.00
	72"....................................... includes bubble vials	$79.00

Customer Reviews

John from Garland, TX: Product Rating = Service Rating =
Product Use = Full Time/Professional

As a full time Custom Street Rod Builder and metal Fabricator, I can honestly say that your Deluxe Digital SmartTool is one of the "Finest" tools that I have ever used. When fabricating a Street Rod chassis/frame it is imperative that certain areas of the frame are exact as possible such as the radiator/core support. I have never owned a tool that was as easy to use that has the accuracy of your Deluxe Digital SmartTool with the Magnetic Bracket. Before welding the mounting seats and core support rails, all of these areas "Must" be level or it will cause problems that will start very small and the multiply in severity with each additional assembly or part which is added thereafter. This process is usually somewhat time consuming but with your Tool I have been able to cut my set up time down by about one third, plus be absolutely certain that my work is level and plumb with the front of the frame. I recommend the Deluxe Digital SmartTool and the Magnetic Bracket to everyone that is in the fabrication business. It is money, "Wisely Spent".I hope you sell a ton of them.

Minh from Fountain Valley, CA: Product Rating = Service Rating =
Product Use = Part Time/Hobby

I've been bending tubes and rotating tubes to be notched with a Dial Level for some time now. It works fine but to get it accurate, it takes a lot of set up time. With a normal dial level, you need someome to stand inches away from it to get a reading. And you pretty much ALWAYS need two people to make bends. With the smart tool, you now longer need a buddy to stand inches away from the gauge. I can read the display on the smart tool yards away! The sound on the smart tool also helps a LOT when doing bends by yourself! Also, when I did multiple bends with a dial gauge before, it would never lay perfectly flat on the floor. With the Smart Tool it's perfect everytime! This is a MUST HAVE for anyone with a bender and/or a notcher! Spend the extra money on this, you wont regret it!