|
 Tennsmith
Slip Rolls |
|
Manual Rolls
Tennsmith’s
slip rolls combine precision-turned, ground and polished, high carbon
steel rolls with heavy-duty, cast iron end frames, and welded steel
base to make an accurate and durable forming tool. Convenient operating
features include large roll adjusting screws, scales for speeding
repeat set-up, and a front-mounted handle to lift the upper roll
for material removal. Wire grooves are standard. Tennsmith's initial
pinch slip roll, Model SR48, is a heavy-duty, affordable, production
tool for forming curved parts and tubes in 16-gauge and lighter
sheet metal. The SR48 roll has three gear-driven rolls that ensure
even starting and feeding of capacity materials. The gearing features
a 4:1 reduction ratio for ease of operation of heavy materials.
All gears are fully enclosed for safety and protection from the
elements.
|
48" Manual Model shown with optional stand |
|
|
48" SR48P
powered roll shown
Ships From Manufacturer
Lead Times May Exist
|
Powered Unit
The SR48P powered
slip roll combines all the features of our SR48 initial pinch roll
with the productive advantage of electric-powered drive for production
forming of curved parts and tubes made of 16-gauge and lighter sheet
metal.
Drive power
for the SR48P is supplied by a heavy-duty, industrial quality gear
reduction motor and roller chain directly to the gear train. The
roll drive is controlled by a toggle-action, shrouded foot pedal
for instant forward and reverse action. The drive motor is equipped
with an electro-magnetic brake to prevent roll creep and over-forming.
Electrical and operator safety features include a full-length, front
and back wire cable safety mechanism which instantly stops the rolls
when tripped, two magnetic motor starters, fully enclosed electrical
box with pilot light, insulated reinforced conduit for all wiring
and fully enclosed drive train. The rolls and gears are mounted
in hardened bronze bushings for long life and precision operation.
Tennsmith’s Model SR48P is the best value of any four-foot,
16-gauge powered roll on the market.
Be the first to review
this product
|
|
Model
Number
|
SR24
|
SR36
|
SR42
|
SR48
|
SR48P
|
|
Capacity
(Mild Steel Gauge)
|
20
|
22
|
24
|
16
|
16
|
|
Max.
Forming Length (in.)
|
24
|
36
|
42
|
49
|
49
|
|
Diameter
of Rolls (in)
|
2
|
2
|
2
|
3
|
3
|
|
Min.
Forming Radius (in.)
|
1
|
1
|
1
|
1-1/2
|
1-1/2
|
|
Wire
Grooves (in.)
|
3/16,
1/4, 5/16
|
3/16,
1/4, 5/16
|
1/4,
5/16, 3/8
|
3/8,
1/2, 5/8
|
3/8,
1/2, 5/8
|
|
Gear
Ratio
|
n/a
|
n/a
|
n/a
|
4:1
|
4:1
|
|
Ship
Weight (lbs)
|
190
|
250
|
270
|
775
|
1100
|
Not rolling mild steel? Click
here for a material comparison chart
|
SR24, 20 Gauge, 24" Capacity*............................................................. |
|
|
|
24"
Floor Stand*......................................................... |
|
| SR36,
22 Gauge, 36" Capacity*............................................................. |
|
| |
36"
Floor Stand*........................................................ |
|
| SR42,
24 Gauge, 42" Capacity*............................................................ |
|
| |
42"
Floor Stand*........................................................ |
|
|
SR48, 16 Gauge, 48" Capacity*............................................................ |
|
|
|
48"
Floor Stand*........................................................ |
|
SR48P,
16 Gauge, 48" Capacity (220V
3ph 60 hz, 3/4 HP)*.....................
(220V 1 ph power available - add $495.00) |
|
*
This
product ships via motor freight only. Shipping charges for this
item will NOT be reflected in the shopping cart. You
will be contacted with a shipping quote prior to shipment.
|
|
|
