RMD programmable tubing benders can be equipped with the optional IDX tubing bender positioning table.  A tubing bender fitted with a rotary positioning table allows for accurate bends in varying planes as well as consistent distance between bends.

• RMD tube benders that can be fitted with the table are the models RDB-250, RDB-300, and the RDB-350.
  
  
• Can be attached or taken off with ease.
  
  
• Available in 10', 15' and 20' lengths.
  
  
• The positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.
  
  
• The positioning carriage has a heavy duty lubricated gear box that is used to turn the position of the completed bend to the desired varying plane.  To change the plane of bend, the operator simply turns a hand wheel and stops at the plane of bend angle (large 360 degree angle dial).
  
  
• The table comes with an 8" three jaw chuck with 2-1/2" thru hole that allows for longer pieces of tubing than the table length.  Chuck can handle up to 4-1/2" OD.  The minimum OD is 1/4".
  
  
• The table has a linear indicator strip so the operator can set up accurate distances between bends.   Mechanical stops can be positioned for the start of each bend.  Using the mechanical stops is very beneficial for repeatability on bigger production runs.
  
  
• Great for hand railing, auto chassis, furniture, marine products, playground equipment, and hundreds of additional applications.

Closeup of chuck assembly

Ships from Manufacturer
Ship Weight: 625 lbs